P.E.S. Power Box
The PES Power Box is
the starting point for your
e-stim adventures. This is the only electro stimulation power box on
that has an extensive line of electrode attachments that are designed
specifically for maximum stimulation and electrical compatibility. It
impress you from the start with its simple to use operation and it
forward durable design.
a brief "walk"
around the PES Power Box... the image above basically shows you what
what and the list below describes them...
turns the Power
Box on and off. The switch should be in the off position before
applying, or removing electrodes.
This is the
adjustment. This knob and the Fine Power Knob should be on 1 when the
is turned on, and then increased as needed. ( in some configurations
knob may increase to 9 or 10 before the sensations are felt)
This is the
fine tune adjustment
for the coarse power adjustment. It will increase the power at a slower
the pulsation of the current and should be set at 10 before turning on
the power. It produces a steady pulse when set at 10 and a very slow
when set on 1.
frequency of the current and should be set at 10 when the box is turned
on. It produces a sharper or softer feel of the current and is a very
feature in achieving a hands free ejaculation.
is a "thumb
wheel" found on the right hand side of the PES power box and is a
part of the frequency adjustment.
indicator lights will
illuminate when the power is on and will flash intermittently to the
of the pulse.
A & B Lead
connections are found
at the top of the PES Power Box and is the location where the Low
A & B Power
These two push
on the front of the PES Power Box interrupt the power sent to the
when depressed and return the current flow when released. (note: the
control should be turned to 1 or the power box turned off before
on a 9 Volt Alkaline Battery (not included)!
here for P.E.S. Power Box & Electrodes FAQ's
The P.E.S. Power Box
includes A/C Adapter
and two sets of Low Profile Leads!
all of the exciting, extremely stimulating attachments available
|Buying your first PES Power Box and love anal
play? Take advantage of this great offer! This
everything you need to start an anal adventure you will love... over
and over again! The double connector Electro-flex™ anal plug
electrode is the perfect size ( 1" wide X 4" long). It also
includes the Power Box, 2
sets of leads, A/C adapter, instructions and a tube of
Price: $473.85 only $426.47*
Need some help
getting started with electro-play?
Well, this easy to use combination kit should take the sting out
(pun intended, of course!) for you! It has everything you need to get
going: The complete Power Box including A/C Adapter
and two sets of Low Profile Leads, the Rectal
Pacifier (can be used anally or vaginally) and the very versatile
1/8" wide Sparkler, instructions and a
tube of Surgical
It's such a great deal... seize the moment!
Electro-Play Starter Kit
Price: $437.80 only
Profile Pinch Leads
Profile Lead Wires
takes erotic electro-stimulation to new heights of comfort and
The Pinch Lead is a low profile, lightweight attachment
is compatible with all P.E.S. products, and makes hooking up to any
electrode as simple as "Pinch and Snap," so that your hands are free to
operate the P.E.S. Power-Box.
"banana style" plugs, which protrude 1 ½ inches above the base of
the electrode, the Low Profile Pinch Leads attaches almost flat at less
than 1/4" once snapped into place on the electrode device. This means
you can move into any position you desire without worry, even sitting
lying on your back. You can even wear your electro-stim electrode
Banana Plug design
is very uncomfortable, cannot sit, lay on, put legs together and is
impossible to wear underneath clothing!
Profile Leads (shown
above on the Electro-Flex Penile Ring) are streamlined making it
to wear it comfortably underneath clothing, sitting, legs close
laying flat, etc...
USAGE OF PINCH LEADS:
Hold the lead wire
in your hand with the pinch lead held between the thumb and fore
making sure that the metal contacts are at the bottom side of the pinch
lead closest to the electrode, as shown above. Pinch to open.
Position the pinch
lead contacts over the head of the stud post. Lightly compress the
edges to open the contacts while exerting a slight downward motion.
Release to close. The
pinch lead will then be securely fastened on the electrode's
Step 3. For
the reverse procedure by pinching the outside edges of the pinch
lead to open
and remove with a slight upward motion.
to this connection
leads from P.E.S., you can use any of their awesome and powerful P.E.S.
Electrodes such as the butt plugs,
cock rings, vaginal plugs, Deep Throat, Prostate Stimulator
electrodes, etc. with any manufacturer's power box, such as Erostek,
Folsom and Zeus Electro's 6 Channel or Tempest 10 Channel Power
in mind, due to the extra power
needed to function, the P.E.S. electrodes will NOT
work with TENS Units!!
length from PES pinch connector to female pin connector is
Female Pin Connector to P.E.S. Pinch/Low
Connector Adapter Leads (sold as pair*)
(*pair = black/red or green/yellow, based on stock
case you need 'em, we have 'em! Spare PES Accessory Leads are both
great to have as spares and to replace your leads that may have simply
worn out or been lost in the heat of play.
- One lead with (2) snap connectors
- Direct replacement for leads
included with all PES Power Boxes
Spare Pair of Low Profile Leads consists of one 3.5 mm plug with two
wires (either black/red or green/yellow*) which are approximately 48"
long, each wire terminating with a Low Profile Pinch connector.
These are the same leads with Low Profile snap connectors
that are shipped with each and every PES Power Box.
= black/red or green/yellow,
based on stock
Pair of Low Profile Leads